C2C-SR5
Sensor reference / sensor-to-CAN
5V sensor reference board that reads analog sensors and puts them on CAN.
PrototypeNative Hardwire PDM28 integration
From carb-era wiring
to CAN.
Small CAN boards that get sensors, speed signals, lighting and fuel pumps onto the bus - for restomod, hot-rod and diesel-swap builders.
Native integration
Native with the Hardwire PDM28 today; PDM15 / PDM25 / PDM35 support is on the way.
Native
Hardwire PDM28
Coming soon
Hardwire PDM15 / PDM25 / PDM35
V2 models, not native yet
Plus other CAN-based PDMs, ECUs and dashes. Running something else? Tell us what you have.
Request an integrationLess wire
Put inputs and outputs near where they live and run CAN instead of long harness bundles.
Hardwire-native
Native integration with Hardwire PDM28. PDM15 / PDM25 / PDM35 support coming soon.
Builder-sized
Focused boards for one job each, so you add only what your build needs.
The lineup
C2C-VR2
2-channel VR / Hall to CAN
Two VR or Hall inputs, each sent on CAN as rpm, speed or frequency (not an ECU timing input).
PrototypeC2C-RIO-L
Rear I/O - lighting
Rear I/O box for tail, brake, turn and reverse lighting controlled over CAN.
ConceptC2C-RIO-P
Rear I/O - fuel pump
Rear I/O box for fuel pump control with PWM pump speed, commanded over CAN.
Concept